About Scott Spark 970 2019
The SCOTT Spark 970 has a super light Alloy frame, as well as a front and rear fork/shock lockout allowing for a more optimized ride. It's lightweight, durable, affordable and retains all the great geometry and ride of its Carbon cousins.
Asymmetric Design: The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibres achieve their full potential when used in smooth straight lines. Off setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot.
Rocker Link: The Spark carbon linkage is constructed with a compression moulding process. It’s 37g lighter than the aluminium equivalent and half the weight of the previous Spark linkage. Making the link in two pieces means all excess material can be removed from the inside of the linkage,without sacrificing stiffness.
Trunnion Construction: Scott have adopted the new Metric shock sizing standards with a Trunnion mount. Since the shock body now extends between the two lower mounting bolts, Scott's suspension partners have more design space. This means the shock has more stroke for the same eye to eye length. Stroke on the 165mm eye to eye shock has increased from 38mm to 40/45mm.The Trunnion standard also offers structural gains. The shorter shock enables them to build a very compact frame and shock package, which integrates tightly to the seat tube. They managed to have a very tiny yet stiff linkage-lighter than ever. Thanks to the Trunnion mount construction, stand over height on the new Spark is very low. They are still able to realize a super compact full suspension frame and provide the ability to mount both a small and big water bottle.
The Spark family maintains the 165mm eye-to-eye shock length of the previous Spark 900 (Scott's shortest shock), but realises up to 7mm more shock stroke. All Spark RC and most Spark and Spark Plus bikes utilize the FOX Nude shock, specially made for SCOTT:
-165mm Metric Trunnion shock
-40mm (100mm travel RC Spark line-up) vs. 38mm (old Spark)
-45mm (120mm travel Spark line-up)
By turning the Trunnion shock upside-down, they can fully integrate it into the frame which results in several benefits. Since the Trunnion mount is the same width as the down tube and mainpivot, they can have a very clean frame design in this critical area. The lack of tight transitions and small details allows for an efficient, continuous carbon structure. Carbon material added to reinforce the shock mount also stiffens the connection between the down tube, main pivot and bottom bracket, a key stiffness path.
The flipped shock also lowers the frame’s center of gravity helping to give a more planted feel when riding. Unsprung mass is reduced since it is the lighter part of the shock, connected to the linkage, not the heavier body which must move during an impact – the suspension system can react faster. Scott's TwinLoc remote cable can be routed cleanly into the down tube.
Scott Sports was founded in 1958 by Ed Scott in Idaho, USA and operates its headquarters from Givisiez, Switzerland. They produce bicycle, wintersport, motorsport and running equipment. They are known for their innovative products which have been used used to win world championships and races at the highest level.